UPPERSTRUCTURE / Cab Procedure to Remove Cab Glass Procedures to Remove Right-Hand Glass, Rear Left Glass, Lower Door Glass and Rear Glass Right-Hand Glass CAUTION: When removing the broken or cracked glass, the glass shards may cause serious injury. Before removing, use the gummed tape or something like in order to paste the broken or cracked glass and reinforce them. Remove the glass pieces away. 1. Remove the resin panel, garnish, spacer or etc. around the glass. 2. Prick a hole in the adhesive by using an awl (or cutter knife). 3. Pass a piano wire (or a wire) through the hole.
W1JB-02-01-009 Rear Glass Rear Left-Hand Glass Garnish Garnish W1JB-02-01-010 Resin Panel Lower Glass of Door Cab Glass Cab Awl W1SE-02-01-033 Adhesive Piano Wire (or Metal Wire) W1SE-02-01-034 W2-1-13