OPERATOR'S STATION Overload Alarm Switch (Optional) During lifting load work with overload alarm switch (4) ON, if overloading is detected, the buzzer sounds and overload alarm indicator (8) on the multi-monitor comes ON. Turn the overload alarm switch OFF to deactivate the overload alarm system function. 4 M1U1-01-010 8 T1V1-05-01-094 5 Seat Heater Switch When seat heater switch (5) is turned ON, the seat surface is heated so that the seat section becomes warm. When the temperature of the seat section is raised to the specified temperature, heating is automatically stopped.
M1U1-01-011 6 Revolving Light Switch (Optional) When the revolving light switch (6) is turned ON, the revolv- ing light provided at the rear on the cab roof comes ON. M1U1-01-012 Electrical Control Main Switch (Optional) 7 ) mark side of electrical control main switch (7) is pressed, the electrical control (grip switch) system be- comes operable. When there is no need to use the electrical control (grip switch) system, press the ( When the ( ) mark side of the main switch to avoid mis-operation. M1U1-01-013 1-53