OPERATOR'S STATION ADJUSTING THE FIXED SEAT (Optional) Seat Height and Angle Adjustment Seat height adjustment range is 60 mm (2.4 in) with steps every 15 mm (0.6 in) (5 positions in total). Moreover, the height of the front part and the rear part of the seat are ad- justed independently, thus allowing the angle of the seat to be adjusted. CAUTION: Avoid possible injury while operating lever (1). When pushing down lever (1), do not grab it. Fingers may be pinched between lever (1) and the seat stand. Be sure to push on the upper face of lever (1). Use lever (1) to adjust the seat height and/or seat angle as follows: • To adjust the front part of the seat:
Push down lever (1) while sitting on the seat, and apply or remove body weight to obtain the desired height. When the desired height is obtained, release lever (1). • To adjust the rear part of the seat: Pull up lever (1) while sitting on the seat, and apply or remove body weight to obtain the desired height. When the desired height is obtained, release lever (1). Caution: Possibility of pinched fingers Push down with the palm. SS-955 4 3 1 Console and Seat Fore-aft Adjustment Pull lever (2) to the right to adjust the seat and both right and left consoles to desired distance from the travel pedals and levers. Release lever to lock seat and consoles into posi- tion. NOTE:
Seat and console fore-aft adjustment range is 120 mm (4.7 in) with steps every 20 mm (0.8 in). 1 2 M1U1-01-029 Seat Fore-Aft Adjustment Pull lever (3) to unlock the seat from both consoles. With lever (3), slide the seat to the desired distance from pilot control levers. Release the lever. NOTE: Seat fore-aft adjustment range is 160 mm (6.3 in) with steps every 16 mm (0.8 in). Backrest Adjustment Pull up lever (4) to release backrest lock. Move backrest to the desired position and release the lever. 1-81