OPERATING THE ENGINE STOPPING THE ENGINE Engine stop procedure 1. Park the machine on a level surface. 2. Lower the bucket to the ground. 3. Turn engine control dial (1) to the slow idle position and run the engine for 5 minuets to cool the engine. SA-390 3 IMPORTANT: Turbocharger may be damaged if the engine is not properly shut down. 4. Turn key switch (2) OFF. Remove the key from the key switch. 5. Pull pilot control shut-off lever (3) to the LOCK position.
If the engine does not stop with the key switch turned in the OFF position M1U1-01-025 In case the engine does not stop even if the key switch is turned OFF due to failure of the machine, move engine stop switch (4) downward to stop the engine. 1 CAUTION: Do not use the emergency stop switch, ex- cept when unavoidable. Moreover, Do not operate the machine until repair is completed when stopping the engine with the failure of the machine. Slow Idle M1U1-01-033 2 M178-01-049 M1U1-01-029 4 3-10