OPERATOR'S STATION ATTACHMENT SELECTION (Only Machines Equipped with Optional Parts) IMPORTANT: Select the attachments from the work mode screen. In order to display the work mode screen, push work mode selection key F1 after basic screen displays, or select from main menu. Selecting an Attachment by Using Work Mode Selection Key F1 1. When the basic screen displays, push work mode selec- tion key F1 and display the work mode screen. Key F1 Basic Screen 2. Push a key located under an attachment mark to be used in order to select the attachment. T1V1-05-01-123 (In the right example, Crusher 1 is selected.) NOTE: When selecting Digging, return to the basic screen. 3.
On the attachment specification screen, confirm if speci- fication of the installed attachment agrees with that dis- played on the screen. Digging NOTE: When pushing the back key, return to the previous screen. Back Key 4. Push the determination key, and the basic screen dis- plays. Work Mode Screen Select Crusher 1 T1V5-05-01-109 Back Key Determination key Attachment Specification Screen T1V5-05-01-028 1-21