Specifications and requirements EMU36880 Muddy or acidic water Yamaha strongly recommends that you have your dealer install the optional chromium- plated water pump kit if you use the outboard motor in muddy or acidic water conditions. However, depending on the model it might not be required. EMU30390 Approval label of emission control certif- icate This label is attached to the bottom cowling. Existing Technology; N/A 1 EMU36330 Anti-fouling paint A clean hull improves boat performance. The boat bottom should be kept as clean of ma- rine growth as possible. If necessary, the boat bottom can be coated with an anti-foul- ing paint approved for your area to inhibit marine growth.
Do not use anti-fouling paint which includes copper or graphite. These paints can cause more rapid engine corrosion. ZMU04619 1. Approval label location EMISSION CONTROL INFORMATION ENGINE FAMILY : THIS ENGINE CONFORMS TO 2001 U.S. EPA REGULATIONS FOR MARINE SI ENGINES. REFER TO THE OWNERS MANUAL FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS. ZMU05230 EMU25262 Manufactured date label This label is attached to the clamp bracket or the swivel bracket. EMU36340 Motor disposal requirements Never illegally discard (dump) the motor Yamaha recommends consulting the dealer about discarding the motor. EMU25221 EMU25230 North American models This engine conforms to U.S.
Environmental Protection Agency (EPA) regulations for ma- rine SI engines. See the label affixed to your engine for details. Emission control information 17 FELs : g/kW-hr I DLE SPEED : SPARK PLUG : SPARK PLUG GAP (mm) : DISPLACEMENT : cm3 ADVERTISED POWER : kW