Components cable is operating correctly before rein- stalling the top cowling. When the release lever is operated, both the front and rear cowling hooks should be released at the same time. If not, adjust the rear clamp cable adjust- ers. Make sure the cable operates smoothly and is free of corrosion. Check that the cable is properly se- cured in the holder. When reinstalling the cowling, ensure that both the front and rear locks have operated properly. If the cowling has not been locked properly, some parts may be damaged by the top cowling shaking during operation.
EMU26460 Flushing device This device is used to clean the cooling wa- ter passages of the motor using a garden hose and tap water. TIP: For details on usage, see page 55. 1 ZMU04139 1. Flushing device 25