Operation - Section 3 OM3006.4 04/98 Page 3-42 Electronic Displays and Messages After the operator has been informed of the fault code, the action that should be taken is as follows: Cancellation of Action Code 1. Stop the truck in a safe location. If either of the following requirements is satisfied then the action code will be canceled. 2. Apply the parking brake. 1. If the fault which caused the action code is no longer present, then the action code will be can- celed automatically, and the same, or next priority action code will be displayed automatically, if there are any other active faults. 3. Confirm the presence of the fault code and the action code. 4.
Follow the instructions of the action code. 5. Notify a qualified technician for repairs. 2. If the fault remains, the action code can be can- celed by a qualified technician who is trained to monitor the system. The possible action codes are as follows: CODE DESCRIPTION 01 Go to shop after work. 02 Go to shop right now. 03 Reduce engine/machine speed. 04 Stop safely/shut off engine. 05 Wait with engine low idle. 06 Start engine/keep low idle. 07 Keep body seated.