Safety - Section 2 11/98 OM2013 Page 2-20 General Safety A caution plate is located on the right hand inside door panel and also on the lid of the battery box. These instructions must be followed when welding is done on the truck to avoid damage to the electronic components. A plate is located on center deck floor next to radiator fill access cover plate. When actual temperature dif- fers with the indication, change the ratio of antifreeze to match ambient conditions. Service personnel should use caution when ser- vicing radiator. The system is pressurized because of thermal expansion of coolant. "DO NOT" remove radiator cap while engine is hot. Severe burns may result.
The Action Code decal is located on the inside of the cab in the upper left-hand corner of the windshield. This decal explains what action to take when an action code is displayed on the monitor panel on the operator monitor and indicator panel. A service indicator plate is located on the right air cleaner housing. Service filter element when red sig- nal reaches service level in dust indicator. When using compressed air, wear safety glasses and all other safety equipment required when cleaning.