OPERATION TRANSPORTATION Loading 3 1. Load and unload on firm level ground only. Maintain a safe distance from the edge of a road. 2. Properly apply the brakes on the trailer and put blocks under the tires to ensure that the trailer does not move. Make the slope of the ramps a maximum of 15°. Ramp Blocks Block Max. 15° Distance between ramps 3. Set the travel speed switch to the Lo position. 4. Turn auto-deceleration switch (1) OFF and operate the fuel control dial to set the engine speed to low idling. 5. Turn the swing lock switch ON to apply the swing lock. ON 3-109