TRANSPORTATION OPERATION Unloading 3 1. Load and unload on firm level ground only. Maintain a safe distance from the edge of a road. 2. Properly apply the brakes on the trailer and put blocks under the tires to ensure that the trailer does not move. Make the slope of the ramps a maximum of 15°. 3. Remove the chains and wire ropes fastening the machine. Ramp 4. Start the engine. Warm the engine up fully. Ramps Ramp Max 15° Distance between ramps 5. Set the safety lock lever to FREE position (F). 6. Set the travel speed selector switch to the LOW position. 7. Turn auto-deceleration switch (1) OFF and operate the fuel control dial to set the engine speed to low idling. 3-114