ATTACHMENT GUIDE ATTACHMENTS AND OPTIONS ATTACHMENT COMBINATIONS 6 This table lists the combination of attachments which can be installed to the standard arm, short arm and long arm. REMARK When a long arm is installed, if the bucket is pulled in fully to the front of the machine it may hit the chassis; when digging at an angle, the bucket may hit the undercarriage, so be careful when carrying out these operations. Bucket and arm combination These charts based on over-side stability with fully loaded bucket at maximum reach. Please consult your dealer for the bucket range abailable in your region. { : Material weight up to 1.8 t/mі … : Material weight up to 1.5 t/mі E :
Material weight up to 1.2 t/mі -: Not for use 6-20 Bucket capacity (heaped) Width Weight (Without side cutters) No.of teeth Arm SAE, PCSA CECE Without side cutters With side cutters 2.1 m 2.5 m 3.0 m 0.24 0.22 450 mm 575 mm 314 kg 3 { { { 0.28 0.26 550 mm 675 mm 339 kg 3 { { { 0.35 0.33 600 mm 775 mm 367 kg 3 { { { 0.47 0.43 750 mm 875 mm 419 kg 4 { { 0.59 0.53 900 mm 1025 mm 469 kg 4 { E 0.68 0.61 1000 mm 1125 mm 497 kg 4 E -