SAFETY SAFETY MACHINE OPERATION SAFETY RULES FOR TRAVELING q When traveling on flat ground, keep the work equipment 40 to 50 cm high above the ground. q If the work equipment blocks the view and it is difficult to travel in safety, raise the work equipment to a greater height. q When traveling on rough ground, travel at low speed and do not operate the steering suddenly. There is danger that the machine may turn over. The work equipment may hit the ground surface and cause the machine to lose its bal- ance, or may damage the machine or structures in the area.
q When traveling on rough ground or steep slopes, if the machine is equipped with auto-deceleration, always turn the auto-deceleration switch OFF (cancel). q Avoid traveling over obstacles when possible. If the machine has to travel over an obstacle, keep the work equipment close to the ground and travel at low speed. Never travel over obstacles which make the machine tilt strongly to one side. q When traveling or carrying out operations, always keep a safe distance from people, structures, or other machines to avoid coming into contact with them. q When passing over bridges or structures, check first that the structure is strong enough to support the weight of the machine.
When traveling on public roads, check first with the relevant authorities and follow their instructions. q When operating in tunnels, under bridges, under electric wires, or other places where the height is limited, operate slowly and be extremely careful not to let the work equip- ment hit anything. 2-27