OPERATION DETAILED CONTROLS AND GAUGES Auto-deceleration Switch (Selection Switch) This switch (2) acts to activate the function that automatically lowers the engine speed and reduces fuel consumption when the control levers are at neutral. Auto-deceleration lights up: Auto-deceleration is actuated Auto-deceleration goes out: Auto-deceleration is canceled Each time the switch is pressed, the auto-deceleration is actu- ated or canceled. Travel Speed Selector Switch q When loading on or unloading from a trailer, always travel at low speed (with the travel speed selector switch put at the Lo position). Never operate the travel speed selector switch during the loading or unloading operation.
q If the travel speed is switched between Hi and Lo when the machine is traveling, the machine may deviate to one side, even when traveling in a straight line. Stop the machine before switching the travel speed. This switch (3) is used to switch the travel speed between two levels (high and low). Lo lights up: Low speed Hi lights up: High speed When the engine is started, the speed is automatically set to Lo. When traveling in Hi, if more travel power is needed, such as on soft ground or traveling uphill, the transmission automati- cally switches to low speed (Lo), so there is no need to operate the switch. The monitor display stays at Hi.
Wiper Switch This switch (4) actuates the front window wiper. ON lights up: The wiper works continuously. INT lights up: The wiper works intermittently. OFF: The wiper stops. 3-15 WARNING