DETAILED CONTROLS AND GAUGES OPERATION Travel Levers q Do not rest your foot on the pedal during operations. If the pedal is depressed by mistake, the machine may suddenly move and cause a serious accident. Be extremely careful when operating the pedal for travel or steering operations. When you are not using the pedal, do not rest your foot on it. q If the track frame is facing the rear, the direction of travel operations will be reversed when the travel lever is operated.
(The machine will travel forward when operated in reverse, and in reverse when operated for- ward; the left and right directions will also be reversed.) q When operating the travel levers, check if the track frame is facing the front or the rear. (If the sprocket is at the rear, the track frame is facing the front.) Lever (2) is used to change the direction of travel between for- ward and reverse. ( ) shows the pedal operation. (a) FORWARD: The lever is pushed forward (The pedal is angled forward) (b) REVERSE: The lever is pulled back (The pedal is angled back) N (Neutral):
The machine stops REMARK Machines equipped with travel alarm (If equipped) If the lever is shifted to the advance or reverse position from the neutral position, the alarm sounds to warn that the machine is starting to advance. 3-24 WARNING