Operation 3.2 Explanation of components 3.2.16 Air conditioner By taking fresh air into the cab through a filter, it is possible to raise the pressure inside the cab. This makes it possible to pro- vide a pleasant working environment even on dusty jobsites. General locations and function of control panel 3 2 4 5 1 GK032166 1. Fan switch This switch (1) can be used to adjust the air flow to four stages. It also acts as the main switch for the air conditioner. When the OFF switch is pressed, the fan stops. When the switch is pressed, the indicator lamp above the switch lights up to display the air flow. GK032167 2.
Air conditioner switch This switch (2) is used to start or stop the cooling or dehumidify- ing function. When the fan switch is turned ON and the air conditioner switch is pressed, the indicator lamp above the switch lights up. When the switch is pressed again, the switch is turned OFF and the indicator lamp goes out. GK032168 WA150-5H – VEAM934100 3-51 (1) Fan switch (4) FRESH/RECIRC switch (2) Air conditioner switch (5) Temperature control switch (3) Mode selector switch