Operation 3.3 Operation 3.3.7 Operation of work equipment Never raise the boom with the bucket fully loaded when the machine is articulated. There is danger that the machine may tip over. Work equipment control lever (1) can be used to operate the lift arm and bucket as follows. 1 GK020014 Lift arm operation NOTE Do not use the FLOAT position when lowering the bucket. Use the FLOAT position when leveling, see "Leveling opera- tion (3-87)". b c d a Position (a):
RAISE When the work equipment control lever is pulled further from the RAISE position, the lever is stopped in this position until the lift arm reaches the preset position of the kickout, and the lever is returned to the HOLD position. GK020016 Position (b): HOLD Raise The lift arm is kept in the same position. Position (c): LOWER Position (d): FLOAT Lower The lift arm moves freely under external force. GK032142 WA150-5H – VEAM934100 3-83 WARNING WARNING