3.3 Operation Operation 3.3.11 Parking machine z Avoid stopping suddenly. Give yourself ample room when stopping. z Do not park the machine on slopes. If the machine has to be parked on a slope, set it facing directly down the slope, then dig the bucket into the ground and put blocks under the tires to prevent the machine from moving. z If the control lever is touched by accident, the work equipment or the machine may move suddenly, and this may lead to a serious accident. Before leaving the oper- ator's compartment, always set the safety lock lever securely to the LOCK position.
GK032065 3 z Even if the parking brake lever is pulled and set to the LOCK position, there is a danger of the machine moving until the parking brake pilot lamp lights up, so keep the brake pedal depressed. 5 NOTE Never use the parking brake lever to brake the machine when traveling except in an emergency. Apply the parking brake only after the machine has stopped. 4 2 GK020014 1 6 1. Release accelerator pedal (1), then depress brake pedal (2) to stop the machine. 2. Place directional lever (3) in N (neutral) position. N GK032190 3-94 WA150-5H – VEAM934100 WARNING WARNING GK032220