3.3 Operation Operation 3.3.12 Check after stopping engine Check the engine water temperature, engine oil pressure, HST oil temperature, and fuel level with the meters and lamps. If the engine has overheated, do not stop it suddenly. Run the engine at a midrange speed to allow the engine to cool down before stopping it. 3.3.13 Checks after completion of operation 1. Walk around the machine and check the work equipment, body work, and undercarriage, and check also for oil and water leakage. 2. Fill the fuel tank. 3. Check the engine compartment for paper and debris. Clean out any paper and debris to avoid a fire hazard. 4. Remove any mud affixed to the undercarriage.
3.3.14 Locking Always lock the following parts. (1) Fuel filler cap (2) Rear grill (3) Engine side cover (2 places) (4) Cab door (2 places) 4 REMARK The starting switch key is used also for locks (1), (2), (3) and (4). 3 2 1 GK032221 3 GK032222 4 3-96 WA150-5H – VEAM934100