Operation 3.2 Explanation of components 4. Engine cooling water temperature caution lamp This lamp (4) lights up to warn the operator that the engine cool- ing water temperature has risen. During checks before starting (when the starting switch is turned to the ON position but the engine is not started), this monitor does not light up. During operation (engine running) If the engine cooling water temperature rises, the engine cooling water temperature caution lamp only will light up. GK032100 If the water temperature rises further, the central warning lamp will light up and the alarm buzzer will sound intermittently.
At the same time that the central warning lamp lights up, “E02“ and “ENGINE OVERHEAT“ are displayed on the character dis- play in turn, so stop the machine and run the engine at a mid- range speed under no load until the lamp goes out. 5. Fuel level caution lamp This lamp (5) lights up if the amount of fuel remaining in the fuel tank goes below 14 liters (3.70 US gal). If it lights up, check and add fuel as soon as possible. REMARK Even if the caution lamp lights up, action code “E02“ is not displayed on the character display.
GK032101 Warning/Limit functions for travel speed When the travel speed goes above 40.0 km/h (24.9 MPH), the central warning lamp lights up and the alarm buzzer sounds. E 0 0 At the same time, “E00“ is displayed on the character display, and then “OVERRUN PROTECT“ and “E00“ are displayed in turn for 3 seconds each. O V E R R U N P R O T E C T If the alarm buzzer sounds, ease the accelerator pedal back and reduce speed. Travel speed limit function The travel speed is automatically controlled so that it does not go above approx. 44 km/h (27.3 MPH). WA150-5H – VEAM934100 3-19