. OPERATION DETAILED CONTROLS AND GAUGES Example 10:05 -> 10:00 10:59 -> 11:00 10:26 -> 10:26 Press the H, M, and SET buttons to set to the correct time. Antenna NOTICE When transporting the machine or parking it in a garage, always fully retract the antenna to avoid the possibility of breakage. the receiving wave is weak or generates noise, extend the antenna. If the wave is too strong, adjust the sensitivity by retracting the antenna. 3 - 55 Setting Correct Time n (4) to display the time. 1. Press display selector butto After 5 seconds, the display and the time cannot be c display selector button (4) a 2. Press time adjustment but minute. H button: Adjusts hour (ad pressed) M button:
Adjusts minute (a pressed) If the H or M button are ke continuously until the butto SET button: Sets to start of h returns to 00) If the minute display is betw is pressed, the minute read when the minute display is display will return to 00 and minute display is between 0 1. Press display selector butto will return to the frequency display orrected. If this happens, press gain. ton (8) and adjust the hour and vances one hour each time it is dvances one minute each time it is pt pressed, the time will advance n is released. our (when it is pressed, the minute een 0 and 05, and the SET button ing will return to 00. If it is pressed between 55 and 59, the minute the hour will advance by 1.
If the 6 to 54, can not adjust. I f Use Radio with Care To ensure safety, always kee p the sound to a level where it is possible to hear outsi de sounds duri If water gets into the speake r case or radio, it may lead to an unexpec ted failure, s o be careful not on the equipment. Do not wipe the scales or but tons with benzene, thinner, or any other s olvent. Wipe with a soft dry cloth soaked in alcohol if the equipment is extremely dirty. When the battery is replaced , the settings for the preset button s are all cleared, so set them again