. OPERATION MACHINE OPERATIONS AND CONTROLS Check Oil Level in Engine Oil Pan, Add Oil WARNING is stopped and may cause serious burns. Wait for the oil 3. Fully insert dipstick (G) into filler pipe (F), then remove it. close the engine hood. 3 - 61 Parts he engin temperature to g o down before pe rforming this o peration. 1. 2. Open engin Remove di e hood. pstick (G) and wipe the oil off with a cloth. 4. The oil leve l should be bet ween the H a nd L marks on d ipstick ( I f G). f the oil le vel is below the L mark, add engine oil through oil iller (F). oil through oil 5. I f the oil is above the H ma rk, drain the excess engine o il from drain plug ( P), and check t he oil level a 6.
I f the oil lev el is correct, tig REMARK ne is at an angle, reposition it to level before checking. If the machi ne is at an angl e, reposition it to leve l before checking. When check ing the oil level after the en gine has been o perated, allow the engine to co ol for 15 minutes before checking.