. OPERATION MACHINE OPERATIONS AND CONTROLS Adjustment WARNING Seat Adjustment (B) Adjusting reclining the seatback to the upright back to a position that is 3 - 67 Adj ust the seat position before startin g operations or after changing the operator. Adj ust the seat so that the control lev ers and switchis can be operated freel y and easily with the op erator back against the bac krest. Suspension Seat (A) Fore-and-aft adjustment (A) F Move lever (1) to the upper, set the positi on, then release the lever. Fore-and-aft adjustment: 50 mm (2. REMA RK The s eat can be reclined more when The a mount of reclining decreases a when moving the seat back, return on.
positi Pull u p lever (2) and set the sea comfortable for operation, then relea Sit wit h your back against the seat ba back i s not against the backrest, the forwa rd. (C) A djusting armrest angle p by hand approx. 90°. Armre st (3) can be made to spring u In ad dition, by turning the dial (4) at bottom of armrest by hand it is possible to make fine vert ical adjustment of the armre st angle. st adjustment angle: 25°. Armre REMA If the seat back is tipped to the front without raising the armrest (3), the armrest will rise auto (D) O verall fore-and-aft adjustment of seat Move lever (5) to right. After the seat is set to the desired position, relea se the lever (5).
In thi s case, the operator's seat, left and right control levers, an d safety lock lever all slide together Fore-and-aft adjustment: 100 mm (3 (E) A djusting suspension ur own weight by turning knob (6) under the operator's seat. 120 kg (110 to 265 lb). Adjus t the weight adjusting dial to yo ur own weight by turning knob (6) under the operator's The w eight can be adjusted to 50 to If you want to make the seat softer, tu rn the weight adjustment to a lower weight; if you want to make the seat harder, adjus t to a higher weight.When oper ating on uneven surfaces, adjust th e seat to a harder se tting.