. OPERATION MACHINE OPERATIONS AND CONTROLS Wind-in Type Seat Belt WARNING Before fitting the seat belt, check that there is no abnormality in the belt mount bracket or mounting belt. If it is worn or damaged, replace the seat belt. on the back of the belt. Fastening and Removing Seat Belt (4) properly 3 - 69 Even if no abno rmality can be seen in t he belt, r eplace th e seat b elt every 3 years. The da te of manufacture of th e belt is shown Always wear th e seat belt during operation Fit the seat belt so that it is not twiste Check that the b olts of the clamp se curing th e belt t o the c hassis are not loose.
Tighten them if they The tightening to rque for the mounti ng bolt is 24.5 ± 4.9 N· m (2.5 ± 0.5 kgf·m, 1 This seat belt ha s a wind-in device, so it is n ot necessary t Fastening seat bel Hold grip (2) and pull the belt out from wind-in device (1), che the belt is not securely. When doing this locked. Removing belt Press button (5) in buckle (4), and re move to ngue (3 ) from (4). The belt is autom atically wound in, s o hold g rip (2) and ret belt slowly to win