. OPERATION MACHINE OPERATIONS AND CONTROLS Operations Before Starting Engine WARNING When standing up from the operator's seat, always set the safety lock lever LOCK position, regardless of whether the engine is running or stopped. switch (2), turn the key to the ON 3 - 72 to th e 1. Check the safety lock lev er (1) is at the LOCK position. REMARK The engine does not start, if th e safety lock lever is not in the LOCK position. 2. Check that each control l ever is in the NEUTRAL position 3. I position, then carry out th 1) The buzzer will soun d for approx.
1 sec, and the following monitors and gauges Charge level monit Engine oil pressur Engine coolant tem Engine coolant tem Fuel level monitor Fuel level gauge ( Swift deceleration Engine pre-heating If the monitors or gau not sound, there is pr so please contact yo After approx. 3 sec gauges will remain o Charge level monit Engine oil pressur Engine coolant tem Fuel level gauge ( will light up for approx. 3 sec. ges do not light up or the buzzer d oes obably a blown bulb or disconnection, ur Komatsu distributor for repair. onds, the following monitors and n and the others will go out. or (3) e monitor (4) perature gauge (5) 8) and