. OPERATION MACHINE OPERATIONS AND CONTROLS Long Term Storage If there is no breaker or general attachment installed, operating the pedal may cause overheating and other problems. Oil flow (liter/min) B (1) - (2) 45 (3) 90 Low pressure safety valve Cranking pressure When using breaker: 17.17 MPa (175 kgf/cm 2 , 2490 PSI) When using other attachment: 26.51 MPa (270 kgf/cm 2 , 3830 PSI) 3 - 107 If t he equipmen t is not to be used for a long time, do as follows. Se t the stop valve in the LOCK condition Install a plug to the v alve Install a plug to the s topvalve Se t the selector valv e to the position for general attachments such as the crusher.
Se t the lock pin at th e LOCK positio Hydraulic Specification Hydraulic specification Oil flow A Pedal lock - Half stroke 55 full stroke 110