. OPERATION TROUBLES AND ACTIONS Battery Removal and Installation 2. Loosen bolts (3) to remove sheet (4) installed above the battery. Installing of Battery 3 - 132 Removal of Batter y 1. Open up dust cover (1) a nd battery insp ection cover (2). 3. Disconnect ca ble (5) fro m the negative ( -) terminal (grounding side) first. Disconnect c onnection cable (6) and cable (7) from the rminal. ing nuts (8) to remove fixtures (9). battery through battery inspection cover (2). 4. positive (+) te 5. Loosen secur ing nuts (8 ) to remove fixtu 6. Take out the battery through battery ins pection cover (2) NOTICE Afte r securing the b attery, chec k that it does not move.
If it moves, tighten i t again 1. Place the batt ery in the s pecified positio 2. Fasten the ba ttery firmly with fixtures (9) and securing nuts Securing nut t ightening t orque 1st nut: 4.9 t o 5.9 N·m (0.5 to 0.6 kgf·m Between nut s: 58.8 to 7 3.5 N·m (6.0 to 7.5 kgf·m, 43.4 to 54.2 3. Connect cabl e (7) to the positive (+) ter minal of the battery 4. Connect conn ecting cab le (6) first to the positive (+) terminal of the ba 5. Connect cabl e (5) to the negative termin al (-) (grounding 6. Install sheet ( 7. Close battery inspection cover (2) and d