. MAINTENANCE MAINTENANCE PROCEDURE MAINTENANCE MAINTENANCE PROCEDURE sprocket that the rubber shoe is securely CHANGE STEEL SHOES OR ROAD LINER TO RUBBER SHOES WARNING idler rubber 4 - 35 4. Fit a steel p ipe in the rubb er shoe, the n rotate th again and fit the rubber sho e securely o n the idler. 5. Stop the rot ation, and chec f itted to the sprocket and idl 6. Adjust the te nsion of the rub ber shoe. RUBBER SHOE TENSION (PAGE 4-31)". For details, see "CHECK A ND ADJUST RUBBER SHOE 7. Check that t he track tension is correct a nd that the rubber shoe is correctly meshed o n the sprocket and idler, t hen lower t he machine to th e ground.
Whe n charging fro m the steel shoe o r road liner to the rubber shoe, when changing from the rubber sh oe to the steel shoe or road liner, it is necessa ry to remove and adjust the idle r cushion, s o contac t your Komatsu distributor to h ave the change carried out. Changing from Steel Shoes or Road Liners to Rubber Shoes 1. 2. 1. Remove idl mov guard (2). 2. Remove the shoe. Changing from Rubber Shoes to Steel Shoes or Road Liners 1. Remove the rubber shoe an d install the steel shoe or road liner 2. I nstall idler g uard (2) with idl er guard mo unting bol ts (1) .