. OPERATION DETAILED CONTROLS AND GAUGES Caution Monitors CAUTION (1) Charge level monitor (2) Fuel level monitor Charge Level Monitor This monitor (1) indicates an abnormality in the charging system while the engine is running. If the monitor lamp flashes, check the V-belt tension. If any abnormality is found, see "OTHER TROUBLE (PAGE 3-137)". If the monitor flashes, stop the engine immediately or run at low idling, then inspect the problem point immediately and repair the problem. REMARK This lamp will light up if the starting switch is turned ON when the engine is stopped, but this does not indicate any abnormality.
When the engine is started or stopped with the starting switch at the ON position, the lamp may light up and the buzzer may sound momentarily, but this does not indicate any abnormality. 3 - 5 If the warning monitor flashes, c heck the problem point as soo n as possible and carry out maintenance. F ailure to repa ir the problem will lead t o failure of the machine . These are items which need t o be observed when the eng ine is running. If any abnormality occurs, the item ne eding immediate repair is display. If any abnormalit ccurs on sound. flash and the alarming buzzer