. OPERATION DETAILED CONTROLS AND GAUGES the operator that the swift deceleration Actuated: Lights up Canceled: Goes off Gauges and Meter REMARK 3 - 10 Swift Deceleration Monitor This monit or (2) informs t function is being actuated When the swift decele ration swit ch is presse d, the swift deceleratio n display moni tor lights up. When it is pressed again, the monito r goes off. REMARK When the swift deceleratio n monitor is lights up, the engine speed remains at low idling e ven if the fu el contr ol dia is operated . Engine Coolant Temperature Gauge This meter (3) shows the engine cool ant temperatur During nor range (A).
If the lamp in the red rang e (B) lights up during oper ation, run the engine at l ow idling and w ait for the te mperature to g o down to the green rang e (A). ng the engine, continue to warm it up until the engine After starti coolant tem perature rises from white r ange (C) to gr een range (A) in the gaug e. REMARK ment (D) lights up, engine coolant temperature monitor lamp (F) begins to flash, too. When Seg ment (D) lights up, engine coolant temper ature monitor lamp (F) begins to flas When Seg ment (E) lights up, engine coolant temper ature monitor lamp (F) begins to flas h, too. At th e sam e time the alarmin g buzzer begin s to sound.
Fuel Gauge This meter (4) shows the fuel level in the fuel tank. D uring normal operation, the lamp shoul d light up in the green rang e (A). If the lamp in the red range (B) flashes during operati on, there isles than 42 lite fuel. rs (11.10 US gal) of fuel remaining, so check and add maining, so c The correc t level may not be display ed for a short time after the starting sw abnormalit itch is turned to the ON position, but this is not an y. When red range (B) in the fuel gauge lights up, fuel level monitor (C) begin s to flash, too.