. OPERATION DETAILED CONTROLS AND GAUGES Blade Control Lever Travel Levers (with Pedals) WARNING 3 - 23 This lev er (4) is used to contr (a): LO (b): RAI Do no t put your foot on the pe dal unless the machine i s traveling. I f you leave move foot o the pe your foot on the pedal a nd press it by mistake, the machin e will suddenly, and this may lead to a serious accident. Do not r est a n the pedal except when traveling or steering th e machine, using dal. If the t rack frame is facing the rear, the direction of travel operations will be rev When front o (If spr ersed. operating the travel levers, check if the track frame is facing the r the rear.
he track frame is facing the front.) ocket (A) is at the rear, t he track frame is facing the Take g ood care when traveling or steering the machine , using the p edal. Use this lever (5) to change th e direction of travel b etween forward and rev erse. ( ): Pedal oper ation pushed forward s angled forward) ulled back angled back) ps (a) FORWARD: This lever is (This pedal i (b) REVERSE: This lever is p (The pedal is N (Neut ral): The machine sto REMARK Machine s equipped with trav If the tra vel lever is shifted to the forward or revers e position from the neu tral position, the ala rm sounds to warn peopl surroun ding area that the ma chine is going to mov