3. Fill tank only to bottom of filler neck. Approximate fuel tank capacity is 24.6 L (6.5 gal.). 4. Install fuel tank cap. Cleaning and Repairing Plastic Surfaces Your John Deere dealer has the professional materials needed to properly remove surface scratches from any plastic surfaces, do not attempt to paint over marks or scratches in plastic parts. IMPORTANT: Avoid damage! Improper care of machine plastic surfaces can damage that surface: · DO NOT wipe plastic surfaces when they are dry. Dry wiping will result in minor surface scratches. · Use a soft, clean cloth (bath towel, diaper, automotive mitt). · DO NOT use abrasive materials, such as polishing compounds, on plastic surfaces.
· DO NOT spray insect repellent near machine. 1. Rinse hood and entire machine with clean water to remove dirt and dust that may scratch the surface. 2. Wash surface with clean water and a mild liquid automotive washing soap. 3. Dry thoroughly to avoid water spots. 4. Wax the surface with a liquid automotive wax. Use products that specifically say "contains no abrasives." IMPORTANT: Avoid damage! Do not use a power buffer to remove wax. 5. Buff applied wax by hand using a clean, soft cloth. Cleaning and Repairing Metal Surfaces Cleaning: Follow automotive practices to care for your vehicle painted metal surfaces.
Use a high-quality automotive wax regularly to maintain the factory look of your vehicle's painted surfaces. Repairing Minor Scratches (surface scratch): 1. Clean area to be repaired thoroughly. IMPORTANT: Avoid damage! DO NOT use rubbing compound on painted surfaces. 110