spray to terminal to prevent corrosion. Make sure connection is tight. Push red positive cover (H) over positive terminal. 3. Connect black negative (-) cable (I) to battery. Apply petroleum jelly or silicone spray to terminal to prevent corrosion. Make sure connection is tight. Install the Steering Wheel 1. Remove and discard red plastic cap from steering wheel shaft. 2. Install steering wheel on shaft. M71528 3. Install and tighten nut (A) to 34 to 41 N·m (25 to 30 lb-ft). M71529 4. Install cap (B). Install Seat (425) 124