8. Gap must be 0.76 mm (0.030 in.). 9. To change gap, move outer electrode. 10. Install and tighten spark plugs to 20 N·m (15 lb-ft). 11. Connect spark plug wires. 12. Lower hood. Replacing Fuses 1. Raise hood. 2. Remove right-hand side panel. NOTE: The separate fuse (not shown) on the wiring harness is for the fuel pump. 3. Pull fuse out of socket. M71330 4. Check metal clip (C) in fuse window. Discard fuse if clip is broken. IMPORTANT: Avoid damage! Be sure replacement fuse is the proper amperage. 99