OM6011 10/11 VHMS - Section 60 Page 60-7 7. Continue traveling at a speed of 10 km/h (6 mph). After approximately 30 seconds, the cali- bration should be completed and the display will change back to “PLM”. DATA STORED IN PAYLOAD METER The payload meter interprets the period from one dump to the next dump as one cycle and records that data. The maximum limit for stored cycle data is 2900 cycles. When 2900 cycles is exceeded, the old data is overwritten. Download the recorded data using the RS232C port on a personal computer with PLM software installed. The downloaded data is saved in the specified loca- tion on the personal computer as a text file (CSV file).
For details, see the instruction manual for the soft- ware. It is possible to check the downloaded data with a commercially available spreadsheet software that can read text files.
Cycle Data Items Date Time of travel - empty Time remaining stationary Time remaining stationary (month/day) when loading when loaded Time of dump Distance traveled - empty Time of travel - loaded Time taken to dump Machine ID Travel speed - empty Distance traveled - loaded Speed limit (maximum) Open ID Travel speed - empty Travel speed - loaded Warning items for each cycle (average) (maximum) Payload Time remaining stationary Travel speed - loaded when empty (average) Time of travel - empty Time remaining stationary when loading Time remaining stationary when loaded Distance traveled - empty Time of travel - loaded Time taken to dump Travel speed - empty (maximum) Distance traveled - loaded Speed limit Travel speed - empty (average) Travel speed - loaded (maximum) Warning items for each cycle Time remaining stationary when empty Travel speed - loaded (average)