Radio / CD Player - Section 70 03/10 OM7006 Page 70-2 Display The receiver will display the time of day when it is off. Momentarily pressing the TMSET/DSPL (3) button when the receiver is on allows to toggle between dis- plays. Auxiliary Mode When in Auxiliary mode, the radio can play an audio source from an iPOD or an MP3 player that is con- nected via the auxiliary radio lines. When the receiver is set to AM, FM1, FM2, FM3 or WX, the display will toggle between the frequency and time of day. To enable the Auxiliary mode: Press and hold the BAND (2) button for at least 2 seconds until the display shows EXTERNAL AUDIO.
When in the CD mode, the display will toggle between track number and elapsed time, and time of day. To disable Auxiliary mode: Press and hold the BAND (2) button for at least 2 seconds until the radio reverts to the previous mode. When playing an MP3 disc, the display will toggle between the ID3 tag (song title, artist and album title) and time of day. Adjusting the Receiver Settings To adjust the Volume, Bass, Treble, Fade, Balance, Seek Sensitivity and Speakers, press and release the ON/AUDIO (5) knob repeatedly until the desired feature appears on the display. Setting a Default Display 1. Press the BAND (2) button to enter the mode to set a default display. 2.
Press and hold the TMSET/DSPL button for 2 seconds until the hours digits flash. VOLUME: Rotate the AUDIO knob clockwise to increase the volume and counter-clockwise to decrease it. The display will show VOL and the vol- ume level. 3. Press push button (6) until the desired display appears. After 5 seconds of inactivity, the selected default will be displayed. BASS: Press the AUDIO knob until BASS and the current setting appears on the display. Rotate the knob clockwise to increase the bass sound and counter-clockwise to decrease it.
Adjusting the Brightness of the Display If the dash dimmer does not control the brightness of the receiver display or the receiver is operating in One-Hour Timer mode, press and hold the SCAN/ DIM (9) button until DIM and the brightness level appear on the display. Rotate the AUDIO knob clock- wise to increase the brightness of the receiver dis- play and counter-clockwise to decrease it. TREBLE: Press the AUDIO knob until TREBLE and the current setting appears. Rotate the knob clock- wise to increase the treble sounds and counter- clockwise to decrease it. FADE: Press the AUDIO knob until FADE and the current setting appears on the display.
Rotate the knob clockwise to move the sound to the front speak- ers and counter-clockwise to move the sound to the rear. BALANCE: Press the AUDIO knob until BALANCE and the level appear. Rotate the knob clockwise to move the sound to the right speakers and counter- clockwise to move the sound to the left.