OM7004 Cab Radio - Section 70 Page 70-1 RADIO, AM / FM STEREO CASSETTE FIGURE 70-1. CAB RADIO SETTING THE TIME GENERAL RECEIVER FUNCTIONS 1. Turn the key switch ON. 2. Press and hold DSPL/TM SET (9, Figure 70-1) for 2 seconds. When the number display flashes, time set mode is active. The receiver is equipped with two FM radio bands, FM1 and FM2. The two bands are identical, however, each one allows the operator to set 6 preset channels for a total of 12 FM presets overall. 3. Press TUNE / SEEK (7 & 8) to change the hour setting. Turning The Power On And Off 1. Turn the key switch to ON. 4. Press the DSPL/TM button to switch to min- utes. The minute digits will flash when in this mode. 2.
Press PWR (1, Figure 70-1) to turn the receiver on and off. Pushing ON/AUDIO (6) may also be used to turn the receiver power on. 5. Press TUNE / SEEK to change the minute setting. After 5 seconds of inactivity has elapsed, the display will return to the default mode. The clock will now display the correct time of day. Display With the receiver off, the clock will be displayed. Momentarily pressing DSP/TM SET (9) with the receiver on will allow the operator to toggle between displays. When the receiver is in AM, FM1, FM2, or WX, the display will toggle between the frequency and the clock.
When the receiver is in an active satellite mode and the provider is transmitting the available information, the display will toggle between the clock, frequency, station name, artist, song title and music type.