OPERATION 3. Operate lift arm control lever (6) to set the work equipment to the travel posture shown in the diagram. 4. Depress right brake pedal (8) and turn parking switch (9) to the OFF (RELEASE) position to release the parking brake. Keep right brake pedal (8) depressed. REMARKS: If the parking brake is still actuated when parking brake switch (9) is at the OFF (RELEASE) position, turn the parking brake ON, then turn it OFF again. 5. Set speed control lever (10) to the desired position. 6. Set directional lever (11) to the desired position. 7. Release right brake pedal (8) then depress accelerator pedal (3) to move the machine. 2-51 WA320-3MC