OPERATION 12.11.4 PRECAUTIONS WHEN DRIVING MACHINE Traveling at high speed for a long distance causes the tires to become extremely hot, accelerating wear. Avoid high speeds as much as possible. If the machine must be driven for a long distance, take the following precautions. Follow the applicable government regulations relating to this machine, and drive carefully. Before driving the machine, carry out the checks before starting. The most suitable tire pressure, travel speed, or tire type differ according to the condition of the travel surface. Contact your distributor or tire dealer for information.
The following is a guide to suitable tire pressures and speeds when traveling on a paved surface with standard tires. Tire pressure (front and rear): 2.8 kg/cmІ (39.8 psi) Speed: 14 km/h (8.7 mph) Check the tire pressure before starting, when the tires are cool. After traveling for 1 hour, stop for 30 minutes. Check the tires and other parts for damage; also check the oil and coolant levels. Always travel with bucket empty. Never put dry ballast in tires when traveling. 2-64 WA320-3MC