OPERATION ADJUST SEAT BELT WARNING Before fitting the seat belt, check that there is no abnormality in the mounting bracket and mounting of the belt. If the belt is worn or damaged, replace it. Always fasten the seat belt before operations. Always install a seat belt on machines equipped with ROPS. Fastening and removing belt 1. Sit on the seat, depress the brake pedal fully, and adjust the seat so that your back is pressed against the backrest. 2. Sit on the seat, pull the tongue end of the seat belt from the retractor (1). Insert the tongue (4) into the buckle (3). Pul the belt to make sure it is securely locked. 3.
To release the belt, press the release button on the buckle (3), and guide the tongue end of the belt into the retractor. ADJUST REAR VIEW MIRROR Sit in the operator's seat and adjust the rear view mirror so that you can see properly to the rear. 2-44 WA320-3MC