Engine Operation Total Payload and Total Number of Cycles The total payload and overall number of cycles can be displayed using the forced display operation. Both values start from a zero point whenever the memory has been cleared. The payload total is automatically displayed when the load is dumped. Other Data M20007.1 03/02 Payload Meter II M20-13 ITEM UNIT RANGE REMARKS Number when Canceled Number 1 - 65535 Every time the engine is started the number advances by one. Last Two Digits Of Year Year 0 - 99 Month Month 1 - 12 Day Day 1 - 31 Time Hour Hour 24 Hour Clock Time Minute Minute 0 - 59 NOTE:
If the engine operation number is a 0, this indicates that the problem occurred or was canceled (depends on the operation that was performed) when the key switch was in the ON position and the engine was not running. ITEM UNIT RANGE REMARKS Total Payload Metric Tons Short Tons 0 - 999900.0 The total payload since the unit was cleared. Total Number Of Cycles Digital Number 0 - 9999 The number of cycles since the unit was cleared. Last Two Digits Of Year Year 0 - 99 Date and time the unit was cleared.
Month Month 1 - 12 Day Day 1 - 31 Time Hour Hour 24 Hour Clock Time Minute Minute 0 - 59 CONTENT ITEM UNIT RANGE REMARKS Set Up Data That The Operator Can Check Speed Limit Km/MPH 0 - 99 Option Code Digital Number 0 - 13 Communication Mode Calibration Data Year Year 0 - 99 Date and time when calibrated. Month Month 1 - 12 Day Day 1 - 31 Hour Hour 24 Hour Clock Minute Minute 0 - 59