30. MACHINES READY FOR ATTACHMENT 30.4 OPERATION WARNING Be careful when operating the pedal in the deceleration range. The engine speed will rise suddenly. Do not put your foot on the pedal except when operating the pedal. If rest your foot on the pedal during operations, and it is depressed by accident, the attachment may move suddenly and cause serious damage or injury. Operate the attachment as follows. WHEN USING BREAKER Set the lock pin at the FREE position, and depress the front of the pedal to operate the breaker. Set the working mode to the BREAKER position. Precautions when using Check that the stopper valve is in the FREE position.
Check that the selector valve is in the position for using the breaker. For details of the path followed by the oil, see “30.2 HYDRAULIC CIRCUIT”. Consult with the attachment maker to decide whether it is necessary to install an accumulator for the attachment circuit. For details of other precautions when handling the breaker, read and use correctly the instruction manual provided by the breaker manufacturer. When using the breaker, the hydraulic oil deteriorates more rapidly than for normal operations, so change the hydraulic oil and replace the element at a shorter interval. For details, see “23.2 MAINTENANCE INTERVAL WHEN USING HYDRAULIC BREAKER”. Free AM092130 5-15