33. AUTO-GREASING SYSTEM 33.4 EVERY 50 HOURS SERVICE NOTICE For the first 100 hours of operation on new machines, carry out greasing every 10 hours. 33.4.1 GREASING 1. Set the machine to the greasing posture shown below, lower the work equipment to the ground, then stop the engine. 2. Using a grease gun, pump in grease through the grease fittings marked by arrows. 3. Wipe off any old grease that is pushed out. AM092730 1 2 5 3, 4 1. Arm-link connection pin (1 point) 2. Arm-bucket connection pin (1 point) 1 2 AM092740 3. Link connection pin (2 points) 4. Bucket cylinder rod end (1 point) 5. Bucket-link connection pin (1 point) 5 3 4 3 AM092750 5-39