¤ WARNING: For reasons of safety, always follow these safety precautions. 8. PRECAUTIONS FOR MAINTENANCE When carrying out inspection with the inspection window or tank oil filler open, be careful not to drop bolts, nuts, or tools inside the machine. If any part is dropped inside the machine, it will cause breakage or malfunctioning of the machine, which may lead to a serious accident. If you drop anything, always be sure to remove it. DO NOT DROP TOOLS OR PARTS INSIDE MACHINE When carrying out inspection, put only the things necessary for inspection in your pockets.
1-34 TWO WORKERS FOR MAINTENANCE WHEN ENGINE IS RUNNI NG To prevent accidents, do not carry out maintenance with the engine running. If it is necessary to carry out maintenance with the engine running, always do as follows. ‡ One worker sits in the operator’s seat so that it is possible to stop the engine immediately whenever necessary. The workers confirm their actions with each other. ‡ When working near rotating parts, be particularly careful. There is danger of getting caught. ‡ When cleaning the inside of the radiator, set safety lock lever 1 to the LOCK position to make sure that the work equipment does not move. ‡ Be careful not to touch the control levers.
If a control lever has to be operated, always signal your partner to move to a safe place. ‡ Never touch the fan blade or fan belt with your body or tools. There is danger of losing fingers or limbs. A0055210 FLYING PIECES WITH HAMMER WORK ‡ When working with hammers, wear protective glasses, helmet, and other protective clothing. Put a brass rod between the hammer and the object when hitting with the hammer. ‡ If hard metal parts such as pins, edges, teeth, and bearings are hit with a hammer, there is danger that small pieces will fly off and get into your eyes.