11. EXPLANATION OF COMPONENTS This lock lever is a hydraulic lock, so even if it is in the lock position, the work equipment control lever and travel lever will move, but the work equipment, travel motor, and swing motor will not work. Lock Free AM089540 2. TRAVEL LEVERS (WITH PEDAL, AUTO-DECELERATION MECHANISM) N ¤ WARNING N Do not put your foot on the pedal unless the machine is traveling. If you leave your foot on the pedal and press it by mistake, the machine will move suddenly, and this may lead to a serious accident. AM089550 With the track frame facing to the rear, the machine will move in the reverse direction by forward traveling and in the forward direction by reverse traveling.
When the travel lever is used, check to see if the track frame is facing forward or backward. (If the sprocket is located to the rear, the track frame is facing forward.) 1 FORWARD: The lever is pushed forward (The pedal is angled forward) 2 REVERSE: The lever is pulled back (The pedal is angled back) N (Neutral): The machine stops ( ): This indicates operation of the pedal. REMARK Machines equipped with travel alarm (Option) If the lever is shifted to the advance or reverse position from the neutral position, the alarm sounds to warn that the machine is starting to advance. 2-20