11. EXPLANATION OF COMPONENTS 11.7 CAP, COVER WITH LOCK The fuel filler, operator’s cab, engine hood, tool box cover, pump room door (right side of the machine body) and battery room door (left side of the machine body) are fitted with locks. Use the starting key to lock or unlock these places. Insert the key as far as it will go. If the key is turned before it is inserted all the way, it may break. Shoulder AL067870 11.7.1 METHOD OF OPENING AND CLOSING CAP WITH LOCK To open the cap 1. Insert the key into the key slot. 2. Turn the key clockwise (but, for the B type, turn counterclockwise), align the key slot with the match mark on the cap, then open the cap. To lock the cap 1.
Turn the cap into place and insert the key into the key slot. 2. Turn the key counterclockwise (but, for the B type, turn clock- wise) and take the key out. 11.7.2 METHOD OF OPENING AND CLOSING COVER WITH LOCK To open the cover (locked cover) 1. Insert the key into the key slot. 2. Turn the key counterclockwise and open the cover by pulling the cover grip. To lock the cover 1. Close the cover and insert the key into the key slot. 2. Turn the key clockwise and take the key out. 2-28