Komatsu — 11.11 HANDLING AIR CONDITIONER

11. EXPLANATION OF COMPONENTS 5. AIR CONDITIONER SWITCH This is used to switch the air conditioner ON/OFF. 6. OFF SWITCH This switch is use to stop the fan. 7. DEFROSTER SELECTOR LEVER This is used to clear the mist from the front glass in cold or rainy conditions. Selector lever forward: Defroster Selector lever back: Foot The defroster can be used when the vent selector panel is at the C position. Foot Defroster AM089930 AM089940 11.11.2 PRECAUTIONS WHEN USING AIR CONDITIONER Carry out ventilation from time to time when using the cooler. If you smoke when the cooler is on, the smoke may start to hurt your eyes, so turn the lever to FRESH to remove the smoke while continuing the cooling.

When running the air conditioner for a long time, turn the lever to the FRESH position once an hour to carry out ventilation and cooling. Be careful not to make the temperature in the cab too low. When the cooler is on, set the temperature so that it feels slightly cool when entering the cab (5 – 6°C lower than the outside temperature). This temperature difference is considered to be the most suitable for your health, so always be careful to adjust the temperature properly. 11.11.3 CHECK, MAINTAIN MACHINE EQUIPPED WITH AIR CONDITIONER When carrying out inspection and maintenance of a machine equipped with air conditioner, see “23.1 MAINTENANCE SCHEDULE CHART”. 2-32