12. OPERATION 12.1.3 ADJUST BEFORE OPERATION WARNING B Adjust the seat position before starting operations or after changing the operator. Adjust the seat so that the brake pedal can be depressed fully with the operator’s back against the backrest. D A: Fore-and-aft adjustment Move lever 1 to right. After the seat is set to the desired position, release the lever. Adjustable distance: 100 mm (3.3 in) in 10 steps F C B: Adjusting reclining NOTICE The seat can be reclined to a large angle when the seat is pushed fully forward, but the reclining angle is reduced when the seat is moved back, so when moving the seat to the rear, return the seat back to its original position.
E AM090250 Pull lever 2 and set the seat back to a position which is comfortable for operation, then release the lever. Sit with your back against the seat back when adjusting. If your back is not touching the seat back, the seat back may suddenly move forward. C: Adjusting seat tilt 1. Forward tilt ( T ) Push lever 3 down to adjust the angle of the front of the seat. (4 stages) 1. To raise the angle at the front of the seat, keep the lever pushed down and apply your weight to the rear of the seat. 2. To lower the angle at the front of the seat, keep the lever pushed down and apply your weight to the front of the seat. 2-47