* : Adopted in P158LE, PU158TI, P180LE, PU180TI, P222LE, PU222TI 5) Tensioning and changing V-belt z Remove fixing bolts. (1) 2 1 z Remove lock nut. (2) z Adjust bolt (3) until V-belts have correct tensions. z Retighten lock nut and fixing bolts. 3 To change the V-belts loosen mounting 1 bolts (1) and lock nut (2) and push tension pulley inwards by turning adjusting bolt EA6O6013 (3). z Remove fixing bolts. z Remove lock nut. z Adjust nut until V-belts have correct tensions. z Retighten lock nut and fixing bolts. To replace the V-belts loosen lock nut and swing alternator inwards.
EA6O6014 Maintenance of Major Components - 148 - Type Drive belt width Tensioning forces on the tester new installation When servicing after n. long running time e Installation After 10 mi running tim M 9.5 mm 50 kg 45 kg 40 kg A * 11.8 mm 55 kg 50 kg 45 kg B 15.5 mm 75 kg 70 kg 60 kg C 20.2 mm 75 kg 70 kg 60 kg