Drive Selector The electrical drive selector allows the operator to operate the ATV in either 2-wheel-drive (rear wheels) or 4-wheel drive (all wheels). For normal riding on fl at, dry, hard surfaces, 2-wheel drive should be suffi cient. In situations of aggres- sive trail conditions, 4-wheel drive would be the desired choice. To eit- her engage or disengage the front wheels, come to a complete stop; then push the 2WD/4WD switch located on the handlebars. Parking brake !! CAUTION !! Do not attempt to either engage or disengage the front differential while the ATV is moving. Parking brake The parking brake should only be applied as an auxiliary brake.
Whe- never a braking situation is needed, use the service brake. !! WARNING !! Always check to be sure that the parking brake has been disen- gaged before operating the ATV. An accident could result if the parking brake is left engaged while the ATV is operated. The brake may relax Brake lever lock Page 26